Comparing John Deere 1010C vs John Deere 6430

This page provides a detailed comparison of the specifications for the John Deere 1010C and the John Deere 6430. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

John Deere 1010C
View tractor
John Deere 6430
View tractor
Images No images available
Engine
Engine - Manufacturer John Deere John Deere
Engine - Model John Deere 1.9L 4-cyl gasoline | John Deere 2.4L 4-cyl diesel 4045HL281 PowerTech E
Engine - Cooling Type Liquid-cooled Liquid-cooled with thermostat and variable speed fan
Engine - Cylinder Orientation - -
Engine - Valve Configuration - OHV
Engine - Fuel Type Gasoline | Diesel Diesel
Engine - Induction Type - -
Engine - Cylinders 4 4
Engine - Displacement (ci) 115.5 (gasoline) | 144.5 (diesel) 276
Engine - Bore (in) 3.50 (gasoline) | 3.625 (diesel) 4.19
Engine - Stroke (in) - -
Engine - Rated RPM 2500 2300
Engine - Power Output (hp) 40 111.06 at 1995 rpm (Maximum Power)
Transmission
Transmission - Type Manual Selective gear fixed ratio with partial power shift
Transmission - Forward Gears 4 12 or 16 or 24 (depending on transmission model)
Transmission - Reverse Gears - -
Transmission - Total Gears - -
Dimensions
Length (in) 102.1 -
Width (in) 61.1 -
Height (in) 70.9 (gasoline) | 74 (diesel) -
Operating Weight (lb) 7,580 9985 (unladen)
Miscellaneous
Chassis Crawler -
Drive Type 2WD 4x2 2WD or 4x4 MFWD 4WD
Steering Type Multiple disc clutch and brake Hydrostatic power
Coolant Capacity (qts) - 28 (ROPS)
Front Tire Diameter (in) - -
Front Tire Width (in) - -
Rear Tire Diameter (in) - -
Rear Tire Width (in) - -
Front/Rear Rim Diameter (in) - -
Tire Type - Rear: Two 460/85R38, 12 psi; Front: Two 380/85R24, 12 psi
Manufacture - End Year 1964 -
Hitch Type - Three-Point Hitch
Hitch Category - -
Hitch Position - Rear
Hitch Capacity (lb) - 4455
Operator Station Type Open operator station Open, Cab (optional)
Starter Type Electric Electric Starter
PTO Type - Independent
PTO Speed 1 (rpm) - 540
PTO Speed 2 (rpm) - 540/1000 (if equipped with dual-speed PTO)
PTO Speed 3 (rpm) - -
Brake Type Mechanical contracting band -
Hydraulic System Type - Open-center load sensing or Optional closed-center pressure-flow compensated