Comparing John Deere 6105M vs John Deere 6405

This page provides a detailed comparison of the specifications for the John Deere 6105M and the John Deere 6405. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

John Deere 6105M
View tractor
John Deere 6405
View tractor
Images No images available
Engine
Engine - Manufacturer John Deere John Deere
Engine - Model CD4045R024531 4045T
Engine - Cooling Type Liquid-cooled with engine coolant heat exchanger for crankcase oil, hydraulic and transmission oil Liquid-cooled
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type Diesel (No. 2 Diesel, specific gravity 0.8442) Diesel
Engine - Induction Type - -
Engine - Cylinders 4 4
Engine - Displacement (ci) 276 (4525 ml) 276
Engine - Bore (in) 4.19 4.19
Engine - Stroke (in) - -
Engine - Rated RPM 2100 2300
Engine - Power Output (hp) 99.07 (maximum) 106
Transmission
Transmission - Type Selective gear fixed ratio with partial (4) range operator controlled power shift Multiple options: fully synchronized, power shuttle, partial power shift
Transmission - Forward Gears 24 -
Transmission - Reverse Gears - -
Transmission - Total Gears - 16 forward and reverse (maximum)
Dimensions
Length (in) - -
Width (in) - -
Height (in) - -
Operating Weight (lb) 11,040 (static weight without ballast) 7695 to 9855 (ROPS and cab variants respectively for 2WD and 4WD)
Miscellaneous
Chassis 4x2 2WD or 4x4 MFWD 4WD 4x2 2WD
Drive Type 2WD/4WD 2WD
Steering Type Hydrostatic power Power steering
Coolant Capacity (qts) 23.4 16.9
Front Tire Diameter (in) - -
Front Tire Width (in) - -
Rear Tire Diameter (in) - -
Rear Tire Width (in) - -
Front/Rear Rim Diameter (in) - -
Tire Type Ag -
Manufacture - End Year 2015 -
Hitch Type Three-Point Hitch Category 2 and 3 (II and III based on provided information)
Hitch Category - -
Hitch Position - -
Hitch Capacity (lb) 4689 lbs (70 mm cylinders) / 6152 lbs (80 mm cylinders) -
Operator Station Type Two-post foldable ROPS or Cab (optional) Both ROPS and Cab available
Starter Type Electric Electric
PTO Type Independent -
PTO Speed 1 (rpm) 540 -
PTO Speed 2 (rpm) 1000 -
PTO Speed 3 (rpm) - -
Brake Type Hydraulic wet disc -
Hydraulic System Type Open center pressure compensated or closed center load sensing pressure and flow compensated (optional) Constant flow gear pump with optional JD Hy-Gard oil