Comparing Fendt 2096 vs John Deere 5525 Utility

This page provides a detailed comparison of the specifications for the Fendt 2096 and the John Deere 5525 Utility. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

Fendt 2096
View tractor
John Deere 5525 Utility
View tractor
Images No images available No images available
Engine
Engine - Manufacturer - John Deere (Inferred from Model and Engine Model matching)
Engine - Model - 4045
Engine - Cooling Type - -
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type - -
Engine - Induction Type - -
Engine - Cylinders 4 4
Engine - Displacement (ci) 263.3 274.7
Engine - Bore (in) - -
Engine - Stroke (in) - -
Engine - Rated RPM 2300 2400
Engine - Power Output (hp) 92.6 91.2 (Used the precise value of 91.2 hp based on data)
Transmission
Transmission - Type Overdrive, fully synchronized, close-ratio 12F/12R PowrReverser (Assumed based on most detailed data provided)
Transmission - Forward Gears 21 12 (Based on most frequent data)
Transmission - Reverse Gears - -
Transmission - Total Gears - -
Dimensions
Length (in) - -
Width (in) - -
Height (in) 98.4 -
Operating Weight (lb) 6834.4 6223.7
Miscellaneous
Chassis - -
Drive Type - -
Steering Type - -
Coolant Capacity (qts) - -
Front Tire Diameter (in) - -
Front Tire Width (in) - Unknown (Not directly provided for "6.5-16 6PR F2" & "7.50-16 6PR F2")
Rear Tire Diameter (in) - Unknown (Exact diameter not provided)
Rear Tire Width (in) - Unknown (Not directly provided for "12.4-24 6PR R1" & "420/90R30 R1 Radial")
Front/Rear Rim Diameter (in) - -
Tire Type - Front: 6.5-16 6PR F2, Rear: 12.4-24 6PR R1 / Front: 7.50-16 6PR F2, Rear: 420/90R30 R1 Radial (Two tire sizes provided)
Manufacture - End Year - -
Hitch Type - -
Hitch Category - -
Hitch Position - -
Hitch Capacity (lb) - 3373.1 lbs @ 24 inches
Operator Station Type - -
Starter Type - -
PTO Type - -
PTO Speed 1 (rpm) - -
PTO Speed 2 (rpm) - -
PTO Speed 3 (rpm) - -
Brake Type - -
Hydraulic System Type - -