This page provides a detailed comparison of the specifications for the John Deere 5075M and the New Holland Workmaster 55. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
John Deere 5075M
View tractor |
New Holland Workmaster 55
View tractor |
|
---|---|---|
Images | No images available | No images available |
Engine | ||
Engine - Manufacturer | John Deere | ISM Diesel |
Engine - Model | PowerTech 5030 | - |
Engine - Cooling Type | liquid-cooled | Liquid-cooled |
Engine - Cylinder Orientation | - | - |
Engine - Valve Configuration | - | - |
Engine - Fuel Type | diesel | No. 2 Diesel |
Engine - Induction Type | - | - |
Engine - Cylinders | 3 | 4 |
Engine - Displacement (ci) | 179 | 135 cu·in |
Engine - Bore (in) | 3.385 | 3.307 |
Engine - Stroke (in) | - | - |
Engine - Rated RPM | 2200 | 2700 |
Engine - Power Output (hp) | 63.75 | 49.36 hp |
Transmission | ||
Transmission - Type | selective gear fixed ratio | - |
Transmission - Forward Gears | 16 | - |
Transmission - Reverse Gears | - | - |
Transmission - Total Gears | 16 | 8 forward and 8 reverse (2WD), 12 forward and reverse (4WD) |
Dimensions | ||
Length (in) | - | 130.7 (2WD), 133.5 (4WD) |
Width (in) | - | 67.3 |
Height (in) | - | 95.7 |
Operating Weight (lb) | 8265 | 4385 (Unladen tractor mass) |
Miscellaneous | ||
Chassis | 4x2 2WD | - |
Drive Type | 2WD | - |
Steering Type | hydrostatic power | Hydrostatic power |
Coolant Capacity (qts) | 10.4 | - |
Front Tire Diameter (in) | - | - |
Front Tire Width (in) | - | - |
Rear Tire Diameter (in) | - | - |
Rear Tire Width (in) | - | - |
Front/Rear Rim Diameter (in) | - | - |
Tire Type | - | - |
Manufacture - End Year | - | 2014 |
Hitch Type | II/I | Unknown (Category II/I suggests standard three-point hitch) |
Hitch Category | - | - |
Hitch Position | - | - |
Hitch Capacity (lb) | - | 2580 lbs (lift capacity at ends) |
Operator Station Type | - | Two-post foldable ROPS |
Starter Type | Electric Starter (assumed from "Engine - Starter volts: 12") | Electric |
PTO Type | - | Independent |
PTO Speed 1 (rpm) | - | 540 |
PTO Speed 2 (rpm) | - | - |
PTO Speed 3 (rpm) | - | - |
Brake Type | - | Differential mechanical wet disc |
Hydraulic System Type | Open Center | Direct engine drive |