This page provides a detailed comparison of the specifications for the John Deere 4430 and the Rome 600C. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
|
John Deere 4430
View tractor |
Rome 600C
View tractor |
|
|---|---|---|
| Images | No images available | |
| Engine | ||
| Engine - Manufacturer | John Deere | Cummins |
| Engine - Model | John Deere | KTA-1150C |
| Engine - Cooling Type | Liquid-cooled | Liquid-cooled |
| Engine - Cylinder Orientation | - | - |
| Engine - Valve Configuration | - | - |
| Engine - Fuel Type | Diesel | Diesel |
| Engine - Induction Type | - | - |
| Engine - Cylinders | 6 | 6 |
| Engine - Displacement (ci) | 404 ci | 1150 |
| Engine - Bore (in) | 4.25 in | - |
| Engine - Stroke (in) | - | - |
| Engine - Rated RPM | 2200 RPM | 2100 |
| Engine - Power Output (hp) | 125.88 HP | 600 |
| Transmission | ||
| Transmission - Type | Partially synchronized or partial power shift or full power shift | Powershift |
| Transmission - Forward Gears | 8 or 16 | 12 |
| Transmission - Reverse Gears | - | - |
| Transmission - Total Gears | - | - |
| Dimensions | ||
| Length (in) | 160.75 in | - |
| Width (in) | 89.625 in | - |
| Height (in) | - | - |
| Operating Weight (lb) | 11350 lbs | 42,600 |
| Miscellaneous | ||
| Chassis | 4x2 2WD or 4x4 HFWD 4WD | 4x4 Articulated |
| Drive Type | 2WD or HFWD 4WD | 4WD |
| Steering Type | Full-power hydrostatic | - |
| Coolant Capacity (qts) | 30 qts | - |
| Front Tire Diameter (in) | - | - |
| Front Tire Width (in) | - | - |
| Rear Tire Diameter (in) | 38 in | - |
| Rear Tire Width (in) | - | - |
| Front/Rear Rim Diameter (in) | - | - |
| Tire Type | Agricultural | - |
| Manufacture - End Year | 1977 | - |
| Hitch Type | Three-Point Hitch | - |
| Hitch Category | - | - |
| Hitch Position | Rear | - |
| Hitch Capacity (lb) | 4549 lbs | - |
| Operator Station Type | Open station, ROPS or Cab (optional) | - |
| Starter Type | Electric | - |
| PTO Type | Independent | - |
| PTO Speed 1 (rpm) | 540 or 1000 rpm | - |
| PTO Speed 2 (rpm) | - | - |
| PTO Speed 3 (rpm) | - | - |
| Brake Type | Full-power wet disc differential | - |
| Hydraulic System Type | Closed center | - |
