This page provides a detailed comparison of the specifications for the John Deere 2840 and the Rome 600C. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
|
John Deere 2840
View tractor |
Rome 600C
View tractor |
|
|---|---|---|
| Images | No images available | |
| Engine | ||
| Engine - Manufacturer | John Deere | Cummins |
| Engine - Model | - | KTA-1150C |
| Engine - Cooling Type | Liquid-cooled | Liquid-cooled |
| Engine - Cylinder Orientation | - | - |
| Engine - Valve Configuration | - | - |
| Engine - Fuel Type | Diesel | Diesel |
| Engine - Induction Type | - | - |
| Engine - Cylinders | 6 | 6 |
| Engine - Displacement (ci) | 329 ci | 1150 |
| Engine - Bore (in) | 4.02 in | - |
| Engine - Stroke (in) | - | - |
| Engine - Rated RPM | 2500 | 2100 |
| Engine - Power Output (hp) | 89 HP | 600 |
| Transmission | ||
| Transmission - Type | Two-speed power shift / Sliding gear | Powershift |
| Transmission - Forward Gears | 12 (power shift) / 6 (sliding gear) | 12 |
| Transmission - Reverse Gears | - | - |
| Transmission - Total Gears | - | - |
| Dimensions | ||
| Length (in) | 160 in (406 cm) | - |
| Width (in) | 90 in (228 cm) | - |
| Height (in) | 74 in (steering wheel) / 73.6 in (overall) | - |
| Operating Weight (lb) | 8700 lbs | 42,600 |
| Miscellaneous | ||
| Chassis | 4x2 2WD | 4x4 Articulated |
| Drive Type | 2WD | 4WD |
| Steering Type | Power assist | - |
| Coolant Capacity (qts) | 5 qts | - |
| Front Tire Diameter (in) | - | - |
| Front Tire Width (in) | - | - |
| Rear Tire Diameter (in) | - | - |
| Rear Tire Width (in) | - | - |
| Front/Rear Rim Diameter (in) | - | - |
| Tire Type | Ag | - |
| Manufacture - End Year | 1979 | - |
| Hitch Type | Category II | - |
| Hitch Category | - | - |
| Hitch Position | Rear | - |
| Hitch Capacity (lb) | - | - |
| Operator Station Type | Open operator station or two-post Roll-Gard ROPS (optional) | - |
| Starter Type | Electric | - |
| PTO Type | Independent with hydraulic clutch | - |
| PTO Speed 1 (rpm) | 540/1,000 rpm | - |
| PTO Speed 2 (rpm) | - | - |
| PTO Speed 3 (rpm) | - | - |
| Brake Type | Differential hydraulic wet disc | - |
| Hydraulic System Type | Closed center | - |
