This page provides a detailed comparison of the specifications for the John Deere 1010C and the Oliver 1855. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
John Deere 1010C
View tractor |
Oliver 1855
View tractor |
|
---|---|---|
Images | No images available | |
Engine | ||
Engine - Manufacturer | John Deere | Oliver-Waukesha |
Engine - Model | John Deere 1.9L 4-cyl gasoline | John Deere 2.4L 4-cyl diesel | - |
Engine - Cooling Type | Liquid-cooled | Liquid-cooled |
Engine - Cylinder Orientation | - | - |
Engine - Valve Configuration | - | - |
Engine - Fuel Type | Gasoline | Diesel | Diesel or Gasoline |
Engine - Induction Type | - | - |
Engine - Cylinders | 4 | 6 |
Engine - Displacement (ci) | 115.5 (gasoline) | 144.5 (diesel) | 310 ci |
Engine - Bore (in) | 3.50 (gasoline) | 3.625 (diesel) | 3.86 in |
Engine - Stroke (in) | - | - |
Engine - Rated RPM | 2500 | 2400 |
Engine - Power Output (hp) | 40 | 98 HP (diesel) or 92 HP (gasoline) |
Transmission | ||
Transmission - Type | Manual | Gear type with disc clutch or Partial power shift |
Transmission - Forward Gears | 4 | 6 (gear type) or 18 (Hydraul-Shift) |
Transmission - Reverse Gears | - | - |
Transmission - Total Gears | - | - |
Dimensions | ||
Length (in) | 102.1 | 159.5 in (2WD) |
Width (in) | 61.1 | 80.625 in |
Height (in) | 70.9 (gasoline) | 74 (diesel) | 85.5 in (steering wheel) |
Operating Weight (lb) | 7,580 | 11,150 lbs |
Miscellaneous | ||
Chassis | Crawler | 4x2 2WD or 4x4 MFWD 4WD (optional) |
Drive Type | 2WD | 2WD/4WD |
Steering Type | Multiple disc clutch and brake | Hydrostatic power |
Coolant Capacity (qts) | - | 20 qts |
Front Tire Diameter (in) | - | - |
Front Tire Width (in) | - | - |
Rear Tire Diameter (in) | - | - |
Rear Tire Width (in) | - | - |
Front/Rear Rim Diameter (in) | - | - |
Tire Type | - | Ag |
Manufacture - End Year | 1964 | 1975 |
Hitch Type | - | Three-Point Hitch |
Hitch Category | - | - |
Hitch Position | - | Rear |
Hitch Capacity (lb) | - | 4,000 lbs (Cat I/II) or 6,000 lbs (Cat II/III) |
Operator Station Type | Open operator station | Open operator station. Two-post ROPS or cab (optional) |
Starter Type | Electric | Electric |
PTO Type | - | Independent |
PTO Speed 1 (rpm) | - | 540 |
PTO Speed 2 (rpm) | - | 540/1000 (optional) |
PTO Speed 3 (rpm) | - | 1000 (optional) |
Brake Type | Mechanical contracting band | Differential hydraulic disc |
Hydraulic System Type | - | Closed center |