This page provides a detailed comparison of the specifications for the John Deere 1010C and the Mahindra 5005 DI. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
John Deere 1010C
View tractor |
Mahindra 5005 DI
View tractor |
|
---|---|---|
Images | No images available | |
Engine | ||
Engine - Manufacturer | John Deere | Mahindra |
Engine - Model | John Deere 1.9L 4-cyl gasoline | John Deere 2.4L 4-cyl diesel | MDI 3000B |
Engine - Cooling Type | Liquid-cooled | Liquid-cooled |
Engine - Cylinder Orientation | - | - |
Engine - Valve Configuration | - | - |
Engine - Fuel Type | Gasoline | Diesel | Diesel |
Engine - Induction Type | - | - |
Engine - Cylinders | 4 | 4 |
Engine - Displacement (ci) | 115.5 (gasoline) | 144.5 (diesel) | 154 |
Engine - Bore (in) | 3.50 (gasoline) | 3.625 (diesel) | 3.5 |
Engine - Stroke (in) | - | - |
Engine - Rated RPM | 2500 | 2600 |
Engine - Power Output (hp) | 40 | 51 |
Transmission | ||
Transmission - Type | Manual | Gear |
Transmission - Forward Gears | 4 | 8 |
Transmission - Reverse Gears | - | - |
Transmission - Total Gears | - | - |
Dimensions | ||
Length (in) | 102.1 | 133 |
Width (in) | 61.1 | - |
Height (in) | 70.9 (gasoline) | 74 (diesel) | - |
Operating Weight (lb) | 7,580 | 4258 |
Miscellaneous | ||
Chassis | Crawler | 4x2 |
Drive Type | 2WD | 2WD |
Steering Type | Multiple disc clutch and brake | Power |
Coolant Capacity (qts) | - | - |
Front Tire Diameter (in) | - | - |
Front Tire Width (in) | - | - |
Rear Tire Diameter (in) | - | - |
Rear Tire Width (in) | - | - |
Front/Rear Rim Diameter (in) | - | - |
Tire Type | - | - |
Manufacture - End Year | 1964 | - |
Hitch Type | - | II/I |
Hitch Category | - | - |
Hitch Position | - | Rear |
Hitch Capacity (lb) | - | - |
Operator Station Type | Open operator station | - |
Starter Type | Electric | 12 volt |
PTO Type | - | - |
PTO Speed 1 (rpm) | - | - |
PTO Speed 2 (rpm) | - | - |
PTO Speed 3 (rpm) | - | - |
Brake Type | Mechanical contracting band | - |
Hydraulic System Type | - | Open Center |