Comparing Allis Chalmers 190 vs International Harvester Hydro 86

This page provides a detailed comparison of the specifications for the Allis Chalmers 190 and the International Harvester Hydro 86. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

Allis Chalmers 190
View tractor
International Harvester Hydro 86
View tractor
Images No images available
Engine
Engine - Manufacturer Allis Chalmers International Harvester
Engine - Model G2500 (Gasoline), 2800 (Diesel) -
Engine - Cooling Type Liquid-cooled -
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type Gasoline, Diesel Diesel and Gasoline
Engine - Induction Type - -
Engine - Cylinders 6 6
Engine - Displacement (ci) 265 (Gasoline), 301 (Diesel) 312 / 290.8 / 310 (Assuming these are different measurements or errors, and the correct displacement is unknown)
Engine - Bore (in) 3.74 (Gasoline), 3.86 (Diesel) 3.875 / 3.75 (Assuming these are different measurements or errors, and the correct bore is unknown)
Engine - Stroke (in) - -
Engine - Rated RPM 2200 2400
Engine - Power Output (hp) - -
Transmission
Transmission - Type Two-speed power shift Hydrostatic
Transmission - Forward Gears 8 Variable (2-range)
Transmission - Reverse Gears - -
Transmission - Total Gears - -
Dimensions
Length (in) - -
Width (in) - -
Height (in) - -
Operating Weight (lb) 7665 8200
Miscellaneous
Chassis 4x2 2WD 4x2 2WD
Drive Type 2WD 2WD
Steering Type Hydraulic power Power
Coolant Capacity (qts) 18 -
Front Tire Diameter (in) - -
Front Tire Width (in) - -
Rear Tire Diameter (in) - -
Rear Tire Width (in) - -
Front/Rear Rim Diameter (in) - -
Tire Type Ag Ag (Agricultural)
Manufacture - End Year 1972 -
Hitch Type Allis Snap-Coupler, Three-Point Category II Three-Point Hitch
Hitch Category - -
Hitch Position Rear Rear
Hitch Capacity (lb) - -
Operator Station Type Open -
Starter Type Electric Electric
PTO Type Live -
PTO Speed 1 (rpm) 540 -
PTO Speed 2 (rpm) 1000 -
PTO Speed 3 (rpm) - -
Brake Type Band actuated disc -
Hydraulic System Type Open center -