Comparing International Harvester Hydro 100 vs John Deere 7230

This page provides a detailed comparison of the specifications for the International Harvester Hydro 100 and the John Deere 7230. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

International Harvester Hydro 100
View tractor
John Deere 7230
View tractor
Images No images available
Engine
Engine - Manufacturer International Harvester John Deere
Engine - Model - 6068HL280 or 6068HL282
Engine - Cooling Type liquid-cooled Liquid-cooled
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type diesel Diesel
Engine - Induction Type - -
Engine - Cylinders 6-cylinder 6
Engine - Displacement (ci) 436 ci 414.4 ci
Engine - Bore (in) 4.30 in 4.19 in
Engine - Stroke (in) - -
Engine - Rated RPM 2400 2300
Engine - Power Output (hp) - 126.93 hp
Transmission
Transmission - Type hydrostatic Selective gear fixed ratio with partial (4) range operator controlled power shift (AutoQuad-Plus)
Transmission - Forward Gears infinite 24
Transmission - Reverse Gears - -
Transmission - Total Gears - 48
Dimensions
Length (in) - 187 in
Width (in) - 65.4 in
Height (in) - 115 in (ROPS) / 114.2 in (Cab)
Operating Weight (lb) 12,130 lbs 12930 lbs (4WD Operating weight)
Miscellaneous
Chassis 4x2 2WD 4x2 2WD or 4x4 MFWD 4WD (optional)
Drive Type 2WD 2WD or 4WD (based on chassis specification)
Steering Type hydrostatic power Hydrostatic power
Coolant Capacity (qts) - 32.8 qts (ROPS) / 35.5 qts (Cab)
Front Tire Diameter (in) - -
Front Tire Width (in) - 15.0 in
Rear Tire Diameter (in) - 71.3 in
Rear Tire Width (in) - 18.9 in
Front/Rear Rim Diameter (in) - 30 in / 42 in
Tire Type - Ag (agricultural)
Manufacture - End Year - 2017
Hitch Type Category II Category II
Hitch Category - -
Hitch Position Rear Rear
Hitch Capacity (lb) - 18196 lbs
Operator Station Type - Two-post Roll-Gard ROPS or Cab (optional)
Starter Type 12-volt electric Electric
PTO Type - Independent
PTO Speed 1 (rpm) - 540
PTO Speed 2 (rpm) - 1000
PTO Speed 3 (rpm) - 540E (optional)
Brake Type - Differential hydraulic wet disc
Hydraulic System Type - Constant flow load sensing or closed-center load sensing (optional for ROPS)