This page provides a detailed comparison of the specifications for the International Harvester 4186 and the John Deere 8100T. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
International Harvester 4186
View tractor |
John Deere 8100T
View tractor |
|
---|---|---|
Images | No images available | No images available |
Engine | ||
Engine - Manufacturer | International Harvester | John Deere |
Engine - Model | DT-436 | - |
Engine - Cooling Type | Liquid-cooled | Liquid-cooled |
Engine - Cylinder Orientation | - | - |
Engine - Valve Configuration | - | - |
Engine - Fuel Type | Diesel | - |
Engine - Induction Type | - | - |
Engine - Cylinders | 6 | 6 |
Engine - Displacement (ci) | 436 | 496 |
Engine - Bore (in) | 4.3 | 4.56 |
Engine - Stroke (in) | - | - |
Engine - Rated RPM | 2400 | 2200 |
Engine - Power Output (hp) | - | - |
Transmission | ||
Transmission - Type | Gear | Full powershift |
Transmission - Forward Gears | 8 | 16 |
Transmission - Reverse Gears | - | - |
Transmission - Total Gears | - | 20 |
Dimensions | ||
Length (in) | 194 | 207 |
Width (in) | - | 103.7 minimum |
Height (in) | 139 | 122.9 |
Operating Weight (lb) | 22400 | 24470 |
Miscellaneous | ||
Chassis | 4x4 4WD | - |
Drive Type | 4WD | Track |
Steering Type | Hydraulic power | Hydrostatic power |
Coolant Capacity (qts) | - | 35.9 |
Front Tire Diameter (in) | - | - |
Front Tire Width (in) | - | - |
Rear Tire Diameter (in) | 26 | - |
Rear Tire Width (in) | - | - |
Front/Rear Rim Diameter (in) | - | - |
Tire Type | Ag tires | - |
Manufacture - End Year | - | - |
Hitch Type | Category III/II | III/IIIN |
Hitch Category | - | - |
Hitch Position | - | Rear |
Hitch Capacity (lb) | - | - |
Operator Station Type | - | Cab |
Starter Type | 12 volts | 12 Volt |
PTO Type | - | - |
PTO Speed 1 (rpm) | - | - |
PTO Speed 2 (rpm) | - | - |
PTO Speed 3 (rpm) | - | - |
Brake Type | - | - |
Hydraulic System Type | Open center | Pressure/Flow Compensated (PFC) |