This page provides a detailed comparison of the specifications for the Allis Chalmers 5040 and the International Harvester 384. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
|
Allis Chalmers 5040
View tractor |
International Harvester 384
View tractor |
|
|---|---|---|
| Images | No images available | No images available |
| Engine | ||
| Engine - Manufacturer | UTB | International Harvester |
| Engine - Model | Uzina | BD-154 |
| Engine - Cooling Type | Liquid-cooled | Liquid-cooled |
| Engine - Cylinder Orientation | - | - |
| Engine - Valve Configuration | - | - |
| Engine - Fuel Type | Diesel | Diesel |
| Engine - Induction Type | - | - |
| Engine - Cylinders | 3 | 4 |
| Engine - Displacement (ci) | 142.8 | 154 |
| Engine - Bore (in) | 3.74 | 3.5 |
| Engine - Stroke (in) | - | - |
| Engine - Rated RPM | 2400 (early) | 2100 |
| Engine - Power Output (hp) | 40 | 36 |
| Transmission | ||
| Transmission - Type | Partially synchronized with dry disc clutch | Unsynchronized gear |
| Transmission - Forward Gears | 12 (highest number listed) | 8 |
| Transmission - Reverse Gears | - | - |
| Transmission - Total Gears | - | 10 |
| Dimensions | ||
| Length (in) | 115.7 | 130.7 |
| Width (in) | 60.6 | 66.5 |
| Height (in) | 76.4 | 58.7 |
| Operating Weight (lb) | 3858 | 4236 |
| Miscellaneous | ||
| Chassis | 4x2 (2WD) | 4x2 2WD |
| Drive Type | 2WD | 2WD |
| Steering Type | Power | - |
| Coolant Capacity (qts) | 13.9 | 10.8 |
| Front Tire Diameter (in) | - | - |
| Front Tire Width (in) | - | - |
| Rear Tire Diameter (in) | - | - |
| Rear Tire Width (in) | - | - |
| Front/Rear Rim Diameter (in) | - | - |
| Tire Type | Ag | Ag |
| Manufacture - End Year | 1980 | 1982 |
| Hitch Type | Three-Point Hitch | Category I |
| Hitch Category | - | - |
| Hitch Position | Rear | Rear |
| Hitch Capacity (lb) | 2644 | 2600 |
| Operator Station Type | Open operator station or ROPS (optional) | Open operator station |
| Starter Type | Electric | Electric |
| PTO Type | Continuous or independent | - |
| PTO Speed 1 (rpm) | 540 | 540 |
| PTO Speed 2 (rpm) | - | - |
| PTO Speed 3 (rpm) | - | - |
| Brake Type | Mechanical band | - |
| Hydraulic System Type | Open center | Open center |
