Comparing Challenger MT555E vs International Harvester 274

This page provides a detailed comparison of the specifications for the Challenger MT555E and the International Harvester 274. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

Challenger MT555E
View tractor
International Harvester 274
View tractor
Images
Engine
Engine - Manufacturer AGCO Power Nissan
Engine - Model - -
Engine - Cooling Type Liquid-cooled Liquid-cooled
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type Diesel Diesel
Engine - Induction Type - -
Engine - Cylinders 6 3
Engine - Displacement (ci) 402 99
Engine - Bore (in) 4.252 3.27
Engine - Stroke (in) - -
Engine - Rated RPM 2100 2600
Engine - Power Output (hp) 170.3 (Maximum Power at 2100 rpm) 30
Transmission
Transmission - Type Continuously Variable Transmission (CVT) Sliding Gear
Transmission - Forward Gears Low range 0-19 mph (0-30 km/h), high range 0-25 mph (0-40 km/h) 8
Transmission - Reverse Gears - -
Transmission - Total Gears - -
Dimensions
Length (in) - 109.4
Width (in) - 57.9
Height (in) - 67.9
Operating Weight (lb) - 2720
Miscellaneous
Chassis - -
Drive Type - -
Steering Type - -
Coolant Capacity (qts) - 7.2
Front Tire Diameter (in) - -
Front Tire Width (in) - -
Rear Tire Diameter (in) - -
Rear Tire Width (in) - -
Front/Rear Rim Diameter (in) - -
Tire Type - Ag (Agricultural)
Manufacture - End Year - -
Hitch Type III Category I
Hitch Category - -
Hitch Position Rear Rear
Hitch Capacity (lb) - -
Operator Station Type - -
Starter Type Electric 12 volts
PTO Type - -
PTO Speed 1 (rpm) - -
PTO Speed 2 (rpm) - -
PTO Speed 3 (rpm) - -
Brake Type - -
Hydraulic System Type Closed-center load sensing, Direct engine drive -