This page provides a detailed comparison of the specifications for the International Harvester 240 and the John Deere 303. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
|
International Harvester 240
View tractor |
John Deere 303
View tractor |
|
|---|---|---|
| Images | No images available | No images available |
| Engine | ||
| Engine - Manufacturer | International Harvester | John Deere |
| Engine - Model | C-123 | Standard OE 138 |
| Engine - Cooling Type | Liquid-cooled | Liquid-cooled |
| Engine - Cylinder Orientation | - | - |
| Engine - Valve Configuration | - | - |
| Engine - Fuel Type | Gasoline | Diesel |
| Engine - Induction Type | - | - |
| Engine - Cylinders | 4 | 4 |
| Engine - Displacement (ci) | 122.7 | 137.9 |
| Engine - Bore (in) | 3.11 | 3.31 |
| Engine - Stroke (in) | - | - |
| Engine - Rated RPM | 2000 | 2000 |
| Engine - Power Output (hp) | 40 | 36.3 |
| Transmission | ||
| Transmission - Type | Sliding gear | Manual |
| Transmission - Forward Gears | 4 | 10 |
| Transmission - Reverse Gears | - | - |
| Transmission - Total Gears | - | - |
| Dimensions | ||
| Length (in) | 116 | 132.7 |
| Width (in) | 63 | 60 |
| Height (in) | 57.9 | 61.8 |
| Operating Weight (lb) | 3640 | 3836 |
| Miscellaneous | ||
| Chassis | 4x2 2WD | 4x2 |
| Drive Type | 2WD | 2WD |
| Steering Type | Manual | Manual |
| Coolant Capacity (qts) | 15 | 10.6 |
| Front Tire Diameter (in) | - | - |
| Front Tire Width (in) | - | - |
| Rear Tire Diameter (in) | 36 (assuming 11.2-36 tire size) | - |
| Rear Tire Width (in) | - | - |
| Front/Rear Rim Diameter (in) | - | - |
| Tire Type | Agricultural | Agricultural |
| Manufacture - End Year | 1962 | - |
| Hitch Type | IH Fast Hitch | Three-Point Hitch |
| Hitch Category | - | - |
| Hitch Position | - | Rear |
| Hitch Capacity (lb) | - | - |
| Operator Station Type | Open operator station | Open |
| Starter Type | Electric | Electric |
| PTO Type | Transmission | - |
| PTO Speed 1 (rpm) | 540 | - |
| PTO Speed 2 (rpm) | - | - |
| PTO Speed 3 (rpm) | - | - |
| Brake Type | Independent mechanical disc | - |
| Hydraulic System Type | Open center | Open Center |
