This page provides a detailed comparison of the specifications for the Allis Chalmers 200 and the International Harvester 240. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
|
Allis Chalmers 200
View tractor |
International Harvester 240
View tractor |
|
|---|---|---|
| Images | No images available | |
| Engine | ||
| Engine - Manufacturer | Allis Chalmers | International Harvester |
| Engine - Model | Allis Chalmers | C-123 |
| Engine - Cooling Type | Liquid-cooled | Liquid-cooled |
| Engine - Cylinder Orientation | - | - |
| Engine - Valve Configuration | - | - |
| Engine - Fuel Type | Diesel | Gasoline |
| Engine - Induction Type | - | - |
| Engine - Cylinders | 6 | 4 |
| Engine - Displacement (ci) | 301 | 122.7 |
| Engine - Bore (in) | 3.875 | 3.11 |
| Engine - Stroke (in) | - | - |
| Engine - Rated RPM | 2200 | 2000 |
| Engine - Power Output (hp) | - | 40 |
| Transmission | ||
| Transmission - Type | Constant mesh-helical gears | Sliding gear |
| Transmission - Forward Gears | 8 | 4 |
| Transmission - Reverse Gears | - | - |
| Transmission - Total Gears | - | - |
| Dimensions | ||
| Length (in) | 175.5 | 116 |
| Width (in) | 87.625 | 63 |
| Height (in) | 117.5 | 57.9 |
| Operating Weight (lb) | 7,324 | 3640 |
| Miscellaneous | ||
| Chassis | 4x2 2WD | 4x2 2WD |
| Drive Type | 2WD | 2WD |
| Steering Type | Hydraulic power | Manual |
| Coolant Capacity (qts) | 18 | 15 |
| Front Tire Diameter (in) | - | - |
| Front Tire Width (in) | - | - |
| Rear Tire Diameter (in) | - | 36 (assuming 11.2-36 tire size) |
| Rear Tire Width (in) | - | - |
| Front/Rear Rim Diameter (in) | - | - |
| Tire Type | Ag | Agricultural |
| Manufacture - End Year | 1975 | 1962 |
| Hitch Type | Three-Point Hitch | IH Fast Hitch |
| Hitch Category | - | - |
| Hitch Position | Rear | - |
| Hitch Capacity (lb) | 4,608 | - |
| Operator Station Type | Open operator station | Open operator station |
| Starter Type | Electric | Electric |
| PTO Type | Rear PTO | Transmission |
| PTO Speed 1 (rpm) | 540 | 540 |
| PTO Speed 2 (rpm) | 1000 | - |
| PTO Speed 3 (rpm) | - | - |
| Brake Type | Ball actuated disc | Independent mechanical disc |
| Hydraulic System Type | Open center | Open center |
