Comparing International Harvester 1586 vs McCormick Intl GX40

This page provides a detailed comparison of the specifications for the International Harvester 1586 and the McCormick Intl GX40. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

International Harvester 1586
View tractor
McCormick Intl GX40
View tractor
Images
Engine
Engine - Manufacturer International Harvester Yanmar
Engine - Model DT436 -
Engine - Cooling Type Liquid-cooled liquid-cooled
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type Diesel diesel
Engine - Induction Type - -
Engine - Cylinders 6 3
Engine - Displacement (ci) 436 100.2
Engine - Bore (in) 4.3 3.46
Engine - Stroke (in) - -
Engine - Rated RPM 2500 2800
Engine - Power Output (hp) 160 37.5
Transmission
Transmission - Type Partial power shift hydrostatic
Transmission - Forward Gears 12 Infinite (3-range)
Transmission - Reverse Gears - -
Transmission - Total Gears - -
Dimensions
Length (in) 168.9 134.7
Width (in) 111.8 52
Height (in) 115.7 Height (steering wheel): 55.9 | Height (ROPS): 90.6
Operating Weight (lb) 15,124 2WD Hydro: 3285 | 4WD Hydro: 3461
Miscellaneous
Chassis 4x2 (2WD) or MFWD (4WD) 4x2 2WD Unknown
Drive Type 2WD or 4WD as per "TS_Chassis" 2WD
Steering Type Power assist hydrostatic power
Coolant Capacity (qts) 27 -
Front Tire Diameter (in) - -
Front Tire Width (in) Unknown (specifies only the nominal width "11.00", full dimensions not provided) -
Rear Tire Diameter (in) 38 (assumed based on Tire Type e.g., "20.8-38", where "38" is the RIM diameter) -
Rear Tire Width (in) Unknown (specifies only the nominal width "20.8", full dimensions not provided) -
Front/Rear Rim Diameter (in) Front: 16, Rear: 38 (assumed based on the tire sizes provided) -
Tire Type Ag (Agricultural) Standard: Agricultural
Manufacture - End Year 1981 -
Hitch Type Three-Point Hitch Category I
Hitch Category - -
Hitch Position Rear -
Hitch Capacity (lb) - -
Operator Station Type Cab (standard) -
Starter Type Electric 12 volt
PTO Type Independent -
PTO Speed 1 (rpm) 1000 -
PTO Speed 2 (rpm) - -
PTO Speed 3 (rpm) - -
Brake Type Hydraulic disc -
Hydraulic System Type Open center open center