Comparing Deutz-Fahr AgroPrima 6.06 vs International Harvester 1586

This page provides a detailed comparison of the specifications for the Deutz-Fahr AgroPrima 6.06 and the International Harvester 1586. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

Deutz-Fahr AgroPrima 6.06
View tractor
International Harvester 1586
View tractor
Images
Engine
Engine - Manufacturer Deutz International Harvester
Engine - Model - DT436
Engine - Cooling Type - Liquid-cooled
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type Diesel Diesel
Engine - Induction Type - -
Engine - Cylinders 6 6
Engine - Displacement (ci) 345 436
Engine - Bore (in) 3.94 4.3
Engine - Stroke (in) - -
Engine - Rated RPM 2300 2500
Engine - Power Output (hp) 100 160
Transmission
Transmission - Type Manual Partial power shift
Transmission - Forward Gears 18 12
Transmission - Reverse Gears - -
Transmission - Total Gears - -
Dimensions
Length (in) 178.35 168.9
Width (in) - 111.8
Height (in) 106.69 115.7
Operating Weight (lb) 9812 15,124
Miscellaneous
Chassis 4x4 MFWD 4WD 4x2 (2WD) or MFWD (4WD)
Drive Type 4WD 2WD or 4WD as per "TS_Chassis"
Steering Type - Power assist
Coolant Capacity (qts) - 27
Front Tire Diameter (in) - -
Front Tire Width (in) - Unknown (specifies only the nominal width "11.00", full dimensions not provided)
Rear Tire Diameter (in) - 38 (assumed based on Tire Type e.g., "20.8-38", where "38" is the RIM diameter)
Rear Tire Width (in) - Unknown (specifies only the nominal width "20.8", full dimensions not provided)
Front/Rear Rim Diameter (in) - Front: 16, Rear: 38 (assumed based on the tire sizes provided)
Tire Type - Ag (Agricultural)
Manufacture - End Year - 1981
Hitch Type - Three-Point Hitch
Hitch Category - -
Hitch Position - Rear
Hitch Capacity (lb) - -
Operator Station Type - Cab (standard)
Starter Type - Electric
PTO Type - Independent
PTO Speed 1 (rpm) - 1000
PTO Speed 2 (rpm) - -
PTO Speed 3 (rpm) - -
Brake Type - Hydraulic disc
Hydraulic System Type - Open center