Comparing Belarus 310 vs International Harvester 1586

This page provides a detailed comparison of the specifications for the Belarus 310 and the International Harvester 1586. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

Belarus 310
View tractor
International Harvester 1586
View tractor
Images
Engine
Engine - Manufacturer Belarus International Harvester
Engine - Model - DT436
Engine - Cooling Type - Liquid-cooled
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type Diesel Diesel
Engine - Induction Type - -
Engine - Cylinders 2 6
Engine - Displacement (ci) 127 436
Engine - Bore (in) 4.13 4.3
Engine - Stroke (in) - -
Engine - Rated RPM - 2500
Engine - Power Output (hp) 36 160
Transmission
Transmission - Type Sliding Gear Partial power shift
Transmission - Forward Gears 8 12
Transmission - Reverse Gears - -
Transmission - Total Gears - -
Dimensions
Length (in) - 168.9
Width (in) - 111.8
Height (in) - 115.7
Operating Weight (lb) 4800 15,124
Miscellaneous
Chassis 4x4 MFWD 4WD 4x2 (2WD) or MFWD (4WD)
Drive Type 4WD 2WD or 4WD as per "TS_Chassis"
Steering Type - Power assist
Coolant Capacity (qts) - 27
Front Tire Diameter (in) - -
Front Tire Width (in) - Unknown (specifies only the nominal width "11.00", full dimensions not provided)
Rear Tire Diameter (in) 10 38 (assumed based on Tire Type e.g., "20.8-38", where "38" is the RIM diameter)
Rear Tire Width (in) - Unknown (specifies only the nominal width "20.8", full dimensions not provided)
Front/Rear Rim Diameter (in) - Front: 16, Rear: 38 (assumed based on the tire sizes provided)
Tire Type Ag Ag (Agricultural)
Manufacture - End Year - 1981
Hitch Type Rear type II Three-Point Hitch
Hitch Category - -
Hitch Position - Rear
Hitch Capacity (lb) - -
Operator Station Type Open Cab (standard)
Starter Type - Electric
PTO Type - Independent
PTO Speed 1 (rpm) - 1000
PTO Speed 2 (rpm) - -
PTO Speed 3 (rpm) - -
Brake Type - Hydraulic disc
Hydraulic System Type - Open center