This page provides a detailed comparison of the specifications for the International Harvester 140 and the International Harvester 274. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
|
International Harvester 140
View tractor |
International Harvester 274
View tractor |
|
|---|---|---|
| Images | ||
| Engine | ||
| Engine - Manufacturer | International Harvester | Nissan |
| Engine - Model | C-123 | - |
| Engine - Cooling Type | Liquid-cooled | Liquid-cooled |
| Engine - Cylinder Orientation | - | - |
| Engine - Valve Configuration | I-head | - |
| Engine - Fuel Type | Gasoline | Diesel |
| Engine - Induction Type | - | - |
| Engine - Cylinders | 4 | 3 |
| Engine - Displacement (ci) | 122.7 | 99 |
| Engine - Bore (in) | 3.11 | 3.27 |
| Engine - Stroke (in) | - | - |
| Engine - Rated RPM | 1400 | 2600 |
| Engine - Power Output (hp) | 28 | 30 |
| Transmission | ||
| Transmission - Type | Sliding gear | Sliding Gear |
| Transmission - Forward Gears | 4 | 8 |
| Transmission - Reverse Gears | - | - |
| Transmission - Total Gears | - | - |
| Dimensions | ||
| Length (in) | 106.7 | 109.4 |
| Width (in) | 55.9 | 57.9 |
| Height (in) | 65.4 | 67.9 |
| Operating Weight (lb) | 3000 | 2720 |
| Miscellaneous | ||
| Chassis | 4x2 2WD | - |
| Drive Type | 2WD | - |
| Steering Type | Manual worm-and-sector | - |
| Coolant Capacity (qts) | 15 | 7.2 |
| Front Tire Diameter (in) | - | - |
| Front Tire Width (in) | - | - |
| Rear Tire Diameter (in) | - | - |
| Rear Tire Width (in) | - | - |
| Front/Rear Rim Diameter (in) | - | - |
| Tire Type | Ag: Front 5.00-15, Rear 9.5-24 | Ag (Agricultural) |
| Manufacture - End Year | 1979 | - |
| Hitch Type | IH Fast Hitch (one-point) | Category I |
| Hitch Category | - | - |
| Hitch Position | Rear | Rear |
| Hitch Capacity (lb) | - | - |
| Operator Station Type | Open operator station | - |
| Starter Type | Electric | 12 volts |
| PTO Type | Transmission | - |
| PTO Speed 1 (rpm) | 540 | - |
| PTO Speed 2 (rpm) | - | - |
| PTO Speed 3 (rpm) | - | - |
| Brake Type | Differential mechanical contracting band | - |
| Hydraulic System Type | IH Touch-Control | - |
