Comparing Ford 5610 Mark III vs Ford 7000

This page provides a detailed comparison of the specifications for the Ford 5610 Mark III and the Ford 7000. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

Ford 5610 Mark III
View tractor
Ford 7000
View tractor
Images No images available No images available
Engine
Engine - Manufacturer Ford Ford
Engine - Model - Ford
Engine - Cooling Type Liquid-cooled Liquid-cooled
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type Diesel Diesel
Engine - Induction Type - -
Engine - Cylinders 4 4
Engine - Displacement (ci) 256 256
Engine - Bore (in) 4.4 4.41
Engine - Stroke (in) - -
Engine - Rated RPM 2070 2100
Engine - Power Output (hp) - 89
Transmission
Transmission - Type Dual Power (Assuming this is a type of power-shift or partial power-shift) Constant mesh or Dual Power
Transmission - Forward Gears 16 8 (Constant mesh) or 16 (Dual Power)
Transmission - Reverse Gears - -
Transmission - Total Gears - -
Dimensions
Length (in) 2WD: 145.2, 4WD: 153.1 (Assuming these are lengths for each configuration) 141.6
Width (in) - 68.5
Height (in) 2WD exhaust: 110, 4WD exhaust: 113 (Assuming this is the height up to the exhaust tip for each configuration) 60.9 (hood)
Operating Weight (lb) 2WD ROPS: 7280, 2WD Cab: 7700, 4WD ROPS: 7920, 4WD Cab: 8760 6300
Miscellaneous
Chassis 4x2 2WD 4x2 2WD
Drive Type 2WD / 4WD (Assuming both configurations exist due to the provided data) 2WD
Steering Type Power Manual or hydrostatic power (optional)
Coolant Capacity (qts) - 14.5
Front Tire Diameter (in) - -
Front Tire Width (in) - -
Rear Tire Diameter (in) - -
Rear Tire Width (in) - -
Front/Rear Rim Diameter (in) - -
Tire Type Agricultural -
Manufacture - End Year - 1975
Hitch Type - Category II
Hitch Category - -
Hitch Position - Rear
Hitch Capacity (lb) - -
Operator Station Type Cab Open
Starter Type - Electric
PTO Type - Independent Rear PTO
PTO Speed 1 (rpm) - 540
PTO Speed 2 (rpm) - 540/1000
PTO Speed 3 (rpm) - -
Brake Type - -
Hydraulic System Type Open center with closed-center valves (Assuming this indicates a specific hydraulic system design) Open center