Comparing Fendt 307 Ci vs New Holland TK90A

This page provides a detailed comparison of the specifications for the Fendt 307 Ci and the New Holland TK90A. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

Fendt 307 Ci
View tractor
New Holland TK90A
View tractor
Images No images available No images available
Engine
Engine - Manufacturer - -
Engine - Model - -
Engine - Cooling Type - -
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type - Diesel (assumed based on model characteristics)
Engine - Induction Type - -
Engine - Cylinders 4 4
Engine - Displacement (ci) 246.5 238
Engine - Bore (in) - -
Engine - Stroke (in) - -
Engine - Rated RPM 2300 2500
Engine - Power Output (hp) 79.2 87
Transmission
Transmission - Type - Over-center controlled traction clutch
Transmission - Forward Gears 21 8
Transmission - Reverse Gears - -
Transmission - Total Gears - -
Dimensions
Length (in) 13.2 11.1
Width (in) 82.8 (6.9 ft converted to inches) 56.7 *(converted from CEG_Width Outside Frame)*
Height (in) 106.8 (8.9 ft converted to inches for Top of ROPS/FOPS which is most likely the maximum height) -
Operating Weight (lb) 8377.6 -
Miscellaneous
Chassis - Track
Drive Type - -
Steering Type - -
Coolant Capacity (qts) - -
Front Tire Diameter (in) - -
Front Tire Width (in) - -
Rear Tire Diameter (in) - -
Rear Tire Width (in) - -
Front/Rear Rim Diameter (in) - -
Tire Type - -
Manufacture - End Year - -
Hitch Type - Cat I & II
Hitch Category - -
Hitch Position - -
Hitch Capacity (lb) - 4078.6 *(converted from CEG_3 Point Hitch Lift Capacity @ 24 inches)*
Operator Station Type - -
Starter Type - -
PTO Type - -
PTO Speed 1 (rpm) - -
PTO Speed 2 (rpm) - -
PTO Speed 3 (rpm) - -
Brake Type - -
Hydraulic System Type - -