Comparing Farmall 560 vs John Deere 4040

This page provides a detailed comparison of the specifications for the Farmall 560 and the John Deere 4040. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

Farmall 560
View tractor
John Deere 4040
View tractor
Images No images available No images available
Engine
Engine - Manufacturer International Harvester John Deere
Engine - Model D282 | C263 -
Engine - Cooling Type Liquid-Cooled Liquid-cooled
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type Diesel | Gasoline | LP-Gas Diesel
Engine - Induction Type - -
Engine - Cylinders 6 6
Engine - Displacement (ci) 281.3 | 263 359 or 404
Engine - Bore (in) 3.6875 | 3.5625 4.17 or 4.25
Engine - Stroke (in) - -
Engine - Rated RPM 1800 2200
Engine - Power Output (hp) 59.5 110 or 100
Transmission
Transmission - Type Sliding Gear | Partial Power Shift (Torque Amplifier) Partial Power Shift or Partially Synchronized or Full Power Shift
Transmission - Forward Gears 5 | 10 16 or 8 or 13
Transmission - Reverse Gears - -
Transmission - Total Gears - -
Dimensions
Length (in) 140.9 | 155.0 (Hi-Clear) 153.1
Width (in) 107 95.7
Height (in) 87.8 | 107.0 (Hi-Clear) 109.4 or 112.6
Operating Weight (lb) 6,560 | 6,785 10490 or 11070
Miscellaneous
Chassis 4x2 2WD 4x2 2WD or 4x4 MFWD 4WD
Drive Type 2WD -
Steering Type Manual Rack-and-Pinion Power
Coolant Capacity (qts) 16 24
Front Tire Diameter (in) - -
Front Tire Width (in) 6 -
Rear Tire Diameter (in) 38 -
Rear Tire Width (in) 12.4 | 13.6 -
Front/Rear Rim Diameter (in) - -
Tire Type Ag Ag
Manufacture - End Year 1963 1982 or 1984
Hitch Type IH Fast Hitch Three-Point Hitch
Hitch Category - -
Hitch Position - Rear
Hitch Capacity (lb) - 10584 or 4316 or 5395
Operator Station Type Open Sound-Gard Cab
Starter Type Electric Electric
PTO Type Independent Independent
PTO Speed 1 (rpm) 540 540
PTO Speed 2 (rpm) - 1000
PTO Speed 3 (rpm) - -
Brake Type Independent Mechanical Disc Wet disc or Differential hydraulic wet disc
Hydraulic System Type Open Center Closed center