This page provides a detailed comparison of the specifications for the Deutz-Allis 8030 and the John Deere 7630. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
|
Deutz-Allis 8030
View tractor |
John Deere 7630
View tractor |
|
|---|---|---|
| Images | No images available | |
| Engine | ||
| Engine - Manufacturer | Allis Chalmers | - |
| Engine - Model | 670T | 2240 |
| Engine - Cooling Type | Liquid-cooled | - |
| Engine - Cylinder Orientation | - | - |
| Engine - Valve Configuration | - | - |
| Engine - Fuel Type | Diesel (Turbocharged) | - |
| Engine - Induction Type | - | - |
| Engine - Cylinders | 6 | 6 |
| Engine - Displacement (ci) | 426 | 415 |
| Engine - Bore (in) | 4.25 | - |
| Engine - Stroke (in) | - | - |
| Engine - Rated RPM | 2300 | 2100 |
| Engine - Power Output (hp) | - | 175 |
| Transmission | ||
| Transmission - Type | Partial power shift | PowrQuad Plus |
| Transmission - Forward Gears | 16 (in one version), 20 (in another version), 12 (in yet another version) | 16 |
| Transmission - Reverse Gears | - | - |
| Transmission - Total Gears | - | - |
| Dimensions | ||
| Length (in) | 187 | - |
| Width (in) | 93.4 | - |
| Height (in) | - | - |
| Operating Weight (lb) | Ranges from 14,200 to 17,100 depending on setup | - |
| Miscellaneous | ||
| Chassis | 4x2 (2WD) | 4WD |
| Drive Type | Two-Wheel Drive (2WD) | 4WD |
| Steering Type | Hydrostatic power | - |
| Coolant Capacity (qts) | 31 | - |
| Front Tire Diameter (in) | - | - |
| Front Tire Width (in) | - | - |
| Rear Tire Diameter (in) | - | - |
| Rear Tire Width (in) | - | - |
| Front/Rear Rim Diameter (in) | - | - |
| Tire Type | - | Front: F2, Rear: R1 |
| Manufacture - End Year | - | - |
| Hitch Type | - | - |
| Hitch Category | - | - |
| Hitch Position | - | - |
| Hitch Capacity (lb) | - | 10985.7 lbs (at 24 inches) |
| Operator Station Type | - | - |
| Starter Type | Electric (12 Volts) | - |
| PTO Type | - | - |
| PTO Speed 1 (rpm) | - | - |
| PTO Speed 2 (rpm) | - | - |
| PTO Speed 3 (rpm) | - | - |
| Brake Type | - | - |
| Hydraulic System Type | Closed-Center Load-Sensitive | - |
