Comparing Deutz-Allis 7145 vs Deutz-Allis 8030

This page provides a detailed comparison of the specifications for the Deutz-Allis 7145 and the Deutz-Allis 8030. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

Deutz-Allis 7145
View tractor
Deutz-Allis 8030
View tractor
Images No images available No images available
Engine
Engine - Manufacturer Deutz Allis Chalmers
Engine - Model BF6L913 670T
Engine - Cooling Type Air-cooled Liquid-cooled
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type Diesel Diesel (Turbocharged)
Engine - Induction Type - -
Engine - Cylinders 6 6
Engine - Displacement (ci) 374 426
Engine - Bore (in) 4.016 4.25
Engine - Stroke (in) - -
Engine - Rated RPM 2400 2300
Engine - Power Output (hp) - -
Transmission
Transmission - Type Selective gear fixed ratio with partial (2) range operator controlled power shift Partial power shift
Transmission - Forward Gears 36 16 (in one version), 20 (in another version), 12 (in yet another version)
Transmission - Reverse Gears - -
Transmission - Total Gears - -
Dimensions
Length (in) 185.4 187
Width (in) 93 93.4
Height (in) Cab: 107.5, Exhaust: 109.8 -
Operating Weight (lb) 15,395 (without ballast) Ranges from 14,200 to 17,100 depending on setup
Miscellaneous
Chassis 4x4 4WD 4x2 (2WD)
Drive Type 4WD Two-Wheel Drive (2WD)
Steering Type Hydrostatic power Hydrostatic power
Coolant Capacity (qts) Not applicable (Air-cooled engine) 31
Front Tire Diameter (in) - -
Front Tire Width (in) - -
Rear Tire Diameter (in) - -
Rear Tire Width (in) - -
Front/Rear Rim Diameter (in) - -
Tire Type Agricultural -
Manufacture - End Year - -
Hitch Type - -
Hitch Category - -
Hitch Position Rear -
Hitch Capacity (lb) - -
Operator Station Type Cab -
Starter Type Electric (12 volts, 5 hp) Electric (12 Volts)
PTO Type - -
PTO Speed 1 (rpm) - -
PTO Speed 2 (rpm) - -
PTO Speed 3 (rpm) - -
Brake Type - -
Hydraulic System Type Open Center Closed-Center Load-Sensitive