Comparing Deutz-Allis 7145 vs Deutz-Fahr DX 6.30

This page provides a detailed comparison of the specifications for the Deutz-Allis 7145 and the Deutz-Fahr DX 6.30. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

Deutz-Allis 7145
View tractor
Deutz-Fahr DX 6.30
View tractor
Images No images available No images available
Engine
Engine - Manufacturer Deutz Deutz-Fahr
Engine - Model BF6L913 F6L 913
Engine - Cooling Type Air-cooled Air-cooled
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type Diesel Diesel
Engine - Induction Type - -
Engine - Cylinders 6 6
Engine - Displacement (ci) 374 373.9
Engine - Bore (in) 4.016 4.016
Engine - Stroke (in) - -
Engine - Rated RPM 2400 2400
Engine - Power Output (hp) - 115
Transmission
Transmission - Type Selective gear fixed ratio with partial (2) range operator controlled power shift Fully synchronized
Transmission - Forward Gears 36 15
Transmission - Reverse Gears - -
Transmission - Total Gears - 20
Dimensions
Length (in) 185.4 179.1
Width (in) 93 90.5
Height (in) Cab: 107.5, Exhaust: 109.8 107.3 (2WD), 112.2 (4WD)
Operating Weight (lb) 15,395 (without ballast) 9700 (2WD), 10670 (4WD)
Miscellaneous
Chassis 4x4 4WD 4x2 2WD
Drive Type 4WD 2WD
Steering Type Hydrostatic power Power
Coolant Capacity (qts) Not applicable (Air-cooled engine) -
Front Tire Diameter (in) - -
Front Tire Width (in) - -
Rear Tire Diameter (in) - -
Rear Tire Width (in) - -
Front/Rear Rim Diameter (in) - -
Tire Type Agricultural Agricultural
Manufacture - End Year - -
Hitch Type - II
Hitch Category - -
Hitch Position Rear Rear
Hitch Capacity (lb) - -
Operator Station Type Cab -
Starter Type Electric (12 volts, 5 hp) Electric
PTO Type - -
PTO Speed 1 (rpm) - -
PTO Speed 2 (rpm) - -
PTO Speed 3 (rpm) - -
Brake Type - -
Hydraulic System Type Open Center Open center