This page provides a detailed comparison of the specifications for the Chamberlain C6100 and the International Harvester 1256. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
|
Chamberlain C6100
View tractor |
International Harvester 1256
View tractor |
|
|---|---|---|
| Images | No images available | No images available |
| Engine | ||
| Engine - Manufacturer | Perkins | International Harvester |
| Engine - Model | 6.354 | DT407 |
| Engine - Cooling Type | Liquid-cooled | Liquid-cooled |
| Engine - Cylinder Orientation | - | - |
| Engine - Valve Configuration | - | - |
| Engine - Fuel Type | Diesel | Diesel |
| Engine - Induction Type | - | - |
| Engine - Cylinders | 6 | 6 |
| Engine - Displacement (ci) | 354 | 407 |
| Engine - Bore (in) | 3.875 | 4.33 |
| Engine - Stroke (in) | - | - |
| Engine - Rated RPM | 2200 | 2400 |
| Engine - Power Output (hp) | 101 | 113 |
| Transmission | ||
| Transmission - Type | Gear | Gear, Partial Power Shift |
| Transmission - Forward Gears | 9 | 16 (assuming inclusion of Torque Amplifier as a forward gear range) |
| Transmission - Reverse Gears | - | - |
| Transmission - Total Gears | - | - |
| Dimensions | ||
| Length (in) | 152 | 163.8 |
| Width (in) | 96 | 91.7 |
| Height (in) | 75.9 | 85.8 |
| Operating Weight (lb) | 9910 | 10405 |
| Miscellaneous | ||
| Chassis | 4x2 | 4x2 2WD |
| Drive Type | 2WD | 2WD |
| Steering Type | Manual | Power |
| Coolant Capacity (qts) | - | 24 |
| Front Tire Diameter (in) | - | - |
| Front Tire Width (in) | - | - |
| Rear Tire Diameter (in) | - | - |
| Rear Tire Width (in) | - | - |
| Front/Rear Rim Diameter (in) | - | - |
| Tire Type | Agricultural | Ag |
| Manufacture - End Year | - | 1969 |
| Hitch Type | - | Three-Point Hitch |
| Hitch Category | - | - |
| Hitch Position | - | Rear |
| Hitch Capacity (lb) | - | - |
| Operator Station Type | - | Open, ROPS, Cab (optional) |
| Starter Type | - | Electric |
| PTO Type | - | Independent |
| PTO Speed 1 (rpm) | - | 1000 |
| PTO Speed 2 (rpm) | - | - |
| PTO Speed 3 (rpm) | - | - |
| Brake Type | - | Independent hydraulic dry disc |
| Hydraulic System Type | - | Open Center |
