This page provides a detailed comparison of the specifications for the Challenger MT555E and the Steiger Panther III PT-350. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
Challenger MT555E
View tractor |
Steiger Panther III PT-350
View tractor |
|
---|---|---|
Images | ||
Engine | ||
Engine - Manufacturer | AGCO Power | Cummins |
Engine - Model | - | VT903 |
Engine - Cooling Type | Liquid-cooled | liquid-cooled |
Engine - Cylinder Orientation | - | - |
Engine - Valve Configuration | - | - |
Engine - Fuel Type | Diesel | diesel |
Engine - Induction Type | - | - |
Engine - Cylinders | 6 | 8 |
Engine - Displacement (ci) | 402 | 903 |
Engine - Bore (in) | 4.252 | 5.5 |
Engine - Stroke (in) | - | - |
Engine - Rated RPM | 2100 | 2600 |
Engine - Power Output (hp) | 170.3 (Maximum Power at 2100 rpm) | 310.83 |
Transmission | ||
Transmission - Type | Continuously Variable Transmission (CVT) | selective gear fixed ratio |
Transmission - Forward Gears | Low range 0-19 mph (0-30 km/h), high range 0-25 mph (0-40 km/h) | 20 |
Transmission - Reverse Gears | - | - |
Transmission - Total Gears | - | - |
Dimensions | ||
Length (in) | - | 264.6 |
Width (in) | - | 120.2 |
Height (in) | - | 155.7 |
Operating Weight (lb) | - | 31145 |
Miscellaneous | ||
Chassis | - | four-wheel drive with duals |
Drive Type | - | 4WD |
Steering Type | - | hydrostatic and articulated |
Coolant Capacity (qts) | - | 60 |
Front Tire Diameter (in) | - | - |
Front Tire Width (in) | - | - |
Rear Tire Diameter (in) | - | - |
Rear Tire Width (in) | - | - |
Front/Rear Rim Diameter (in) | - | - |
Tire Type | - | - |
Manufacture - End Year | - | - |
Hitch Type | III | Category III* |
Hitch Category | - | - |
Hitch Position | Rear | - |
Hitch Capacity (lb) | - | - |
Operator Station Type | - | - |
Starter Type | Electric | 12 volt |
PTO Type | - | - |
PTO Speed 1 (rpm) | - | - |
PTO Speed 2 (rpm) | - | - |
PTO Speed 3 (rpm) | - | - |
Brake Type | - | - |
Hydraulic System Type | Closed-center load sensing, Direct engine drive | open center |