This page provides a detailed comparison of the specifications for the CaseIH Farmall 25A and the International Harvester 784. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
CaseIH Farmall 25A
View tractor |
International Harvester 784
View tractor |
|
---|---|---|
Images | No images available | |
Engine | ||
Engine - Manufacturer | Mitsubishi | International Harvester |
Engine - Model | - | D246 |
Engine - Cooling Type | liquid-cooled | Liquid-cooled |
Engine - Cylinder Orientation | - | - |
Engine - Valve Configuration | - | - |
Engine - Fuel Type | diesel | Diesel |
Engine - Induction Type | - | - |
Engine - Cylinders | 3 | 4 |
Engine - Displacement (ci) | 80.4 | 246 |
Engine - Bore (in) | 3.07 | 3.94 |
Engine - Stroke (in) | - | - |
Engine - Rated RPM | 2500 | 2400 |
Engine - Power Output (hp) | 24.6 | 67.5 |
Transmission | ||
Transmission - Type | sync shuttle / hydrostatic | Syncromesh with dry disc clutch |
Transmission - Forward Gears | 12 | 8 |
Transmission - Reverse Gears | - | - |
Transmission - Total Gears | - | - |
Dimensions | ||
Length (in) | 117.2 | 141.7 |
Width (in) | - | 73.6 |
Height (in) | 88.2 | 63 |
Operating Weight (lb) | 2469 | 5952 to 7108 |
Miscellaneous | ||
Chassis | - | 4x2 2WD or 4x4 MFWD 4WD |
Drive Type | - | - |
Steering Type | - | Hydraulic power |
Coolant Capacity (qts) | - | 14.37 |
Front Tire Diameter (in) | - | - |
Front Tire Width (in) | - | - |
Rear Tire Diameter (in) | - | - |
Rear Tire Width (in) | - | - |
Front/Rear Rim Diameter (in) | - | - |
Tire Type | - | Ag |
Manufacture - End Year | - | 1984 |
Hitch Type | - | Three-Point Hitch |
Hitch Category | - | - |
Hitch Position | - | Rear |
Hitch Capacity (lb) | - | 3594 lbs |
Operator Station Type | - | Open operator station with ROPS |
Starter Type | Electric Starter | Electric |
PTO Type | 540 (1.375) | Independent |
PTO Speed 1 (rpm) | - | 540 |
PTO Speed 2 (rpm) | - | 1000 |
PTO Speed 3 (rpm) | - | - |
Brake Type | - | Independent hydraulic wet disc |
Hydraulic System Type | Open Center | Open center |