This page provides a detailed comparison of the specifications for the Allis Chalmers HD10 and the Minneapolis-Moline G900. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
Allis Chalmers HD10
View tractor |
Minneapolis-Moline G900
View tractor |
|
---|---|---|
Images | No images available | No images available |
Engine | ||
Engine - Manufacturer | General Motors | Minneapolis-Moline |
Engine - Model | - | - |
Engine - Cooling Type | Liquid-Cooled | - |
Engine - Cylinder Orientation | - | - |
Engine - Valve Configuration | I-head (Inferred from "vertical I-head") | - |
Engine - Fuel Type | Diesel (indicated by "blower diesel") | diesel, LP gas, gasoline |
Engine - Induction Type | - | - |
Engine - Cylinders | 4 | 6 |
Engine - Displacement (ci) | 284 | 451, 425.5 (Discrepancy noted) |
Engine - Bore (in) | 4.25 | 4.375, 4.25 (Discrepancy noted) |
Engine - Stroke (in) | - | - |
Engine - Rated RPM | 1600 | 1800 |
Engine - Power Output (hp) | - | - |
Transmission | ||
Transmission - Type | Sliding Gear | partial power shift |
Transmission - Forward Gears | 6 | 10 |
Transmission - Reverse Gears | - | - |
Transmission - Total Gears | - | - |
Dimensions | ||
Length (in) | 150 | 164.5 |
Width (in) | 94 | 94.1 |
Height (in) | 78 | 84 (steering wheel), 75 (hood) (Discrepancy noted) |
Operating Weight (lb) | 20380 to 21455 | 10300 |
Miscellaneous | ||
Chassis | Track | - |
Drive Type | Tracked | - |
Steering Type | - | - |
Coolant Capacity (qts) | 39 | - |
Front Tire Diameter (in) | - | - |
Front Tire Width (in) | - | 7.5 |
Rear Tire Diameter (in) | - | - |
Rear Tire Width (in) | - | 23.1 |
Front/Rear Rim Diameter (in) | - | - |
Tire Type | Not Applicable (tracked vehicle) | - |
Manufacture - End Year | - | - |
Hitch Type | - | II |
Hitch Category | - | - |
Hitch Position | - | Rear |
Hitch Capacity (lb) | - | - |
Operator Station Type | - | Open |
Starter Type | Electric (12 volts) | Electric (implied from starter volts) |
PTO Type | - | - |
PTO Speed 1 (rpm) | - | - |
PTO Speed 2 (rpm) | - | - |
PTO Speed 3 (rpm) | - | - |
Brake Type | - | - |
Hydraulic System Type | - | open center |