Comparing Allis Chalmers HD10 vs McCormick-Deering WD-6

This page provides a detailed comparison of the specifications for the Allis Chalmers HD10 and the McCormick-Deering WD-6. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

Allis Chalmers HD10
View tractor
McCormick-Deering WD-6
View tractor
Images No images available
Engine
Engine - Manufacturer General Motors International Harvester
Engine - Model - -
Engine - Cooling Type Liquid-Cooled Liquid-cooled
Engine - Cylinder Orientation - -
Engine - Valve Configuration I-head (Inferred from "vertical I-head") I-head
Engine - Fuel Type Diesel (indicated by "blower diesel") Diesel
Engine - Induction Type - -
Engine - Cylinders 4 4
Engine - Displacement (ci) 284 247.7
Engine - Bore (in) 4.25 3.875
Engine - Stroke (in) - -
Engine - Rated RPM 1600 1450
Engine - Power Output (hp) - -
Transmission
Transmission - Type Sliding Gear Gear
Transmission - Forward Gears 6 5
Transmission - Reverse Gears - -
Transmission - Total Gears - -
Dimensions
Length (in) 150 124.4
Width (in) 94 63
Height (in) 78 90
Operating Weight (lb) 20380 to 21455 4350
Miscellaneous
Chassis Track 4x2 2WD
Drive Type Tracked 2WD
Steering Type - Manual
Coolant Capacity (qts) 39 27
Front Tire Diameter (in) - -
Front Tire Width (in) - -
Rear Tire Diameter (in) - -
Rear Tire Width (in) - -
Front/Rear Rim Diameter (in) - -
Tire Type Not Applicable (tracked vehicle) Steel
Manufacture - End Year - -
Hitch Type - -
Hitch Category - -
Hitch Position - -
Hitch Capacity (lb) - -
Operator Station Type - -
Starter Type Electric (12 volts) -
PTO Type - -
PTO Speed 1 (rpm) - -
PTO Speed 2 (rpm) - -
PTO Speed 3 (rpm) - -
Brake Type - -
Hydraulic System Type - -