Comparing Allis Chalmers CA vs Ford 740

This page provides a detailed comparison of the specifications for the Allis Chalmers CA and the Ford 740. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

Allis Chalmers CA
View tractor
Ford 740
View tractor
Images No images available No images available
Engine
Engine - Manufacturer Allis Chalmers Ford
Engine - Model Allis Chalmers -
Engine - Cooling Type Liquid-cooled -
Engine - Cylinder Orientation - -
Engine - Valve Configuration I-head -
Engine - Fuel Type Gasoline Gasoline; LP gas
Engine - Induction Type - -
Engine - Cylinders 4 4
Engine - Displacement (ci) 125.2 134
Engine - Bore (in) 3.39 3.44
Engine - Stroke (in) - -
Engine - Rated RPM 1650 2200
Engine - Power Output (hp) 23.1 33
Transmission
Transmission - Type Non-synchronized gear Unsynchronized gear
Transmission - Forward Gears 4 4
Transmission - Reverse Gears - -
Transmission - Total Gears - -
Dimensions
Length (in) 124.8 132.1
Width (in) - -
Height (in) 72.8 65.07
Operating Weight (lb) 2835 3390
Miscellaneous
Chassis 4x2 2WD 4x2 2WD
Drive Type 2WD 2WD
Steering Type Manual -
Coolant Capacity (qts) 9 15
Front Tire Diameter (in) - -
Front Tire Width (in) 5 -
Rear Tire Diameter (in) - -
Rear Tire Width (in) - -
Front/Rear Rim Diameter (in) - -
Tire Type Agricultural Agricultural
Manufacture - End Year 1958 1957
Hitch Type Allis Snap Coupler -
Hitch Category - -
Hitch Position - -
Hitch Capacity (lb) - -
Operator Station Type Open -
Starter Type Electric Electric (6 volts)
PTO Type Live -
PTO Speed 1 (rpm) 538 -
PTO Speed 2 (rpm) - -
PTO Speed 3 (rpm) - -
Brake Type Differential mechanical contracting band -
Hydraulic System Type - -