Comparing Allis Chalmers 8050 vs New Holland T7.185

This page provides a detailed comparison of the specifications for the Allis Chalmers 8050 and the New Holland T7.185. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

Allis Chalmers 8050
View tractor
New Holland T7.185
View tractor
Images No images available
Engine
Engine - Manufacturer Allis Chalmers FPT (Fiat Powertrain Technologies)
Engine - Model 670I -
Engine - Cooling Type Liquid-cooled Liquid-cooled
Engine - Cylinder Orientation - -
Engine - Valve Configuration - 24-valve
Engine - Fuel Type Diesel Diesel
Engine - Induction Type - -
Engine - Cylinders 6 6
Engine - Displacement (ci) 426 411
Engine - Bore (in) 4.25 4.09
Engine - Stroke (in) - -
Engine - Rated RPM 2300 2200
Engine - Power Output (hp) 169 140
Transmission
Transmission - Type Partial power shift or Power Shift 6-speed power shift | full power shift | continuously-variable transmission (CVT)
Transmission - Forward Gears 20 or 12 (depending on transmission type) 19
Transmission - Reverse Gears - -
Transmission - Total Gears - -
Dimensions
Length (in) 187 211
Width (in) 95.5 95.8
Height (in) 113 (exhaust) 120 (cab), 118.5 (exhaust)
Operating Weight (lb) 15305 (2WD) or 16300 (4WD) 12787 (shipping weight)
Miscellaneous
Chassis 4x2 2WD or 4x4 FWA 4WD 4x4 MFWD 4WD
Drive Type Optional 4WD 4WD
Steering Type Hydrostatic power Hydrostatic power
Coolant Capacity (qts) 32 -
Front Tire Diameter (in) - -
Front Tire Width (in) - -
Rear Tire Diameter (in) 38 38
Rear Tire Width (in) 18.4 18.4
Front/Rear Rim Diameter (in) - -
Tire Type Agricultural -
Manufacture - End Year 1985 -
Hitch Type Three-Point Hitch II
Hitch Category - -
Hitch Position Rear -
Hitch Capacity (lb) 6,680 (3,030 kg) or 8,200 lbs (3,720 kg) -
Operator Station Type Acousta Cab Cab
Starter Type Electric Electric
PTO Type Independent -
PTO Speed 1 (rpm) 1000 -
PTO Speed 2 (rpm) 540 -
PTO Speed 3 (rpm) 1000 (When dual PTO used) -
Brake Type Differential hydraulic wet discs -
Hydraulic System Type Closed-center load-sensitive Closed center load sensing