Comparing Allis Chalmers 8050 vs John Deere 7410

This page provides a detailed comparison of the specifications for the Allis Chalmers 8050 and the John Deere 7410. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

Allis Chalmers 8050
View tractor
John Deere 7410
View tractor
Images No images available No images available
Engine
Engine - Manufacturer Allis Chalmers John Deere
Engine - Model 670I PowerTech 6068
Engine - Cooling Type Liquid-cooled Liquid-cooled
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type Diesel Diesel
Engine - Induction Type - -
Engine - Cylinders 6 6
Engine - Displacement (ci) 426 414
Engine - Bore (in) 4.25 4.17
Engine - Stroke (in) - -
Engine - Rated RPM 2300 2100
Engine - Power Output (hp) 169 120
Transmission
Transmission - Type Partial power shift or Power Shift Fully synchronized, Partial power shift
Transmission - Forward Gears 20 or 12 (depending on transmission type) 12, 16, 20, 28 (depending on transmission model)
Transmission - Reverse Gears - -
Transmission - Total Gears - -
Dimensions
Length (in) 187 167.7
Width (in) 95.5 95.7
Height (in) 113 (exhaust) 111.4 (2WD Cab), 111 (4WD Cab)
Operating Weight (lb) 15305 (2WD) or 16300 (4WD) 11491 to 12855
Miscellaneous
Chassis 4x2 2WD or 4x4 FWA 4WD 4x2 2WD or 4x4 MFWD 4WD
Drive Type Optional 4WD -
Steering Type Hydrostatic power Power
Coolant Capacity (qts) 32 20
Front Tire Diameter (in) - -
Front Tire Width (in) - -
Rear Tire Diameter (in) 38 38
Rear Tire Width (in) 18.4 -
Front/Rear Rim Diameter (in) - -
Tire Type Agricultural -
Manufacture - End Year 1985 -
Hitch Type Three-Point Hitch -
Hitch Category - -
Hitch Position Rear Rear
Hitch Capacity (lb) 6,680 (3,030 kg) or 8,200 lbs (3,720 kg) 7410 lbs (2WD), 8390 lbs (4WD)
Operator Station Type Acousta Cab ComfortGard cab
Starter Type Electric Electric
PTO Type Independent Independent
PTO Speed 1 (rpm) 1000 540
PTO Speed 2 (rpm) 540 1000
PTO Speed 3 (rpm) 1000 (When dual PTO used) -
Brake Type Differential hydraulic wet discs Hydraulic wet disc
Hydraulic System Type Closed-center load-sensitive Closed center pressure flow compensated (PFC)