Comparing Allis Chalmers 7020 vs Challenger MT425

This page provides a detailed comparison of the specifications for the Allis Chalmers 7020 and the Challenger MT425. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

Allis Chalmers 7020
View tractor
Challenger MT425
View tractor
Images
Engine
Engine - Manufacturer Allis Chalmers Perkins
Engine - Model 649I 3054
Engine - Cooling Type Liquid-cooled Liquid-cooled
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type Diesel Diesel
Engine - Induction Type - -
Engine - Cylinders 6 4
Engine - Displacement (ci) 301 243
Engine - Bore (in) 3.875 3.937
Engine - Stroke (in) - -
Engine - Rated RPM 2300 2200
Engine - Power Output (hp) 123.79 -
Transmission
Transmission - Type Partial power shift 24-speed power shuttle
Transmission - Forward Gears 6 ranges with operator power shift 24
Transmission - Reverse Gears - -
Transmission - Total Gears - -
Dimensions
Length (in) 163 158 (2WD), 161 (4WD)
Width (in) 92.6 77
Height (in) 116 (to exhaust) 103 (ROPS), 96 (Cab)
Operating Weight (lb) 11,770 (without ballast) 6182 (2WD ROPS), 6520 (4WD ROPS), 6935 (2WD Cab), 7487 (4WD Cab)
Miscellaneous
Chassis 4x2 2WD 4x2 2WD
Drive Type 2WD 2WD
Steering Type Hydrostatic power Power
Coolant Capacity (qts) 26 -
Front Tire Diameter (in) - -
Front Tire Width (in) 11 -
Rear Tire Diameter (in) - 18.4
Rear Tire Width (in) - -
Front/Rear Rim Diameter (in) - -
Tire Type Ag -
Manufacture - End Year 1981 -
Hitch Type Three-Point Hitch -
Hitch Category - -
Hitch Position Rear Rear
Hitch Capacity (lb) 6,680 (at 610 mm/24 in) -
Operator Station Type Acousta-Cab ROPS/Cab
Starter Type Electric 12 volts
PTO Type Independent -
PTO Speed 1 (rpm) 540/1,000 -
PTO Speed 2 (rpm) - -
PTO Speed 3 (rpm) - -
Brake Type Differential hydraulic wet disc -
Hydraulic System Type Closed center Open center