Comparing Allis Chalmers 5050 vs Massey Ferguson 5455

This page provides a detailed comparison of the specifications for the Allis Chalmers 5050 and the Massey Ferguson 5455. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

Allis Chalmers 5050
View tractor
Massey Ferguson 5455
View tractor
Images No images available
Engine
Engine - Manufacturer Fiat Perkins Diesel
Engine - Model Fiat 1104
Engine - Cooling Type Liquid-cooled Liquid-cooled
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type Diesel Diesel
Engine - Induction Type - -
Engine - Cylinders 3 4
Engine - Displacement (ci) 167.8 268.5
Engine - Bore (in) 4.055 4.134
Engine - Stroke (in) - -
Engine - Rated RPM 2700 2199
Engine - Power Output (hp) 50 92.8
Transmission
Transmission - Type Partially synchronized Selective gear fixed ratio with partial (4) range operator controlled powershift
Transmission - Forward Gears 8 16 with electronic control module providing additional power levels
Transmission - Reverse Gears - -
Transmission - Total Gears - -
Dimensions
Length (in) 119.3 (2WD), 124.7 (4WD) 165.7
Width (in) 67 79.3
Height (in) 59.3 (2WD), 60.3 (4WD) 108.3
Operating Weight (lb) 4410 (Operating), 7690 (Ballasted) 9910 (static weight with operator), 9720 (unladen)
Miscellaneous
Chassis 4x2 2WD or 4x4 MFWD 4WD 4x4 FWA
Drive Type 2WD and 4WD options available 4WD
Steering Type Power assist Hydrostatic power
Coolant Capacity (qts) 14.25 -
Front Tire Diameter (in) - -
Front Tire Width (in) - -
Rear Tire Diameter (in) - -
Rear Tire Width (in) - -
Front/Rear Rim Diameter (in) - -
Tire Type Ag (Agricultural) Front: Two 14.9R28; Rear: Two 18.4R38; Tire Pressures: 15 psi
Manufacture - End Year 1983 2013
Hitch Type II/I Three-Point Hitch
Hitch Category - -
Hitch Position Rear Rear
Hitch Capacity (lb) 3,197 lbs -
Operator Station Type Open operator station (ROPS and canopy optional) -
Starter Type Electric Electric
PTO Type Independent -
PTO Speed 1 (rpm) 540 -
PTO Speed 2 (rpm) - -
PTO Speed 3 (rpm) - -
Brake Type Differential mechanical contracting band -
Hydraulic System Type Open center Open center