This page provides a detailed comparison of the specifications for the Allis Chalmers 5040 and the Long 460. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
Allis Chalmers 5040
View tractor |
Long 460
View tractor |
|
---|---|---|
Images | No images available | |
Engine | ||
Engine - Manufacturer | UTB | Uzina |
Engine - Model | Uzina | 1529 |
Engine - Cooling Type | Liquid-cooled | Liquid-cooled |
Engine - Cylinder Orientation | - | - |
Engine - Valve Configuration | - | - |
Engine - Fuel Type | Diesel | Diesel |
Engine - Induction Type | - | - |
Engine - Cylinders | 3 | 3 |
Engine - Displacement (ci) | 142.8 | 142.8 |
Engine - Bore (in) | 3.74 | 3.74 |
Engine - Stroke (in) | - | - |
Engine - Rated RPM | 2400 (early) | 2400 |
Engine - Power Output (hp) | 40 | 45 |
Transmission | ||
Transmission - Type | Partially synchronized with dry disc clutch | Partially synchronized |
Transmission - Forward Gears | 12 (highest number listed) | 6 |
Transmission - Reverse Gears | - | - |
Transmission - Total Gears | - | - |
Dimensions | ||
Length (in) | 115.7 | 115.4 |
Width (in) | 60.6 | - |
Height (in) | 76.4 | 56.7 |
Operating Weight (lb) | 3858 | 3858 - 4480 |
Miscellaneous | ||
Chassis | 4x2 (2WD) | 4x2 2WD |
Drive Type | 2WD | - |
Steering Type | Power | Manual |
Coolant Capacity (qts) | 13.9 | 13.5 |
Front Tire Diameter (in) | - | - |
Front Tire Width (in) | - | - |
Rear Tire Diameter (in) | - | - |
Rear Tire Width (in) | - | - |
Front/Rear Rim Diameter (in) | - | - |
Tire Type | Ag | Ag front: 6.00x16 (2WD), Ag rear: 14.9x28 (2WD), Lawn/turf front: 7.50x16, Lawn/turf rear: 13.6x28 |
Manufacture - End Year | 1980 | 1991 |
Hitch Type | Three-Point Hitch | II/I |
Hitch Category | - | - |
Hitch Position | Rear | Rear |
Hitch Capacity (lb) | 2644 | 2655 |
Operator Station Type | Open operator station or ROPS (optional) | Open operator station |
Starter Type | Electric | Electric |
PTO Type | Continuous or independent | - |
PTO Speed 1 (rpm) | 540 | 540 |
PTO Speed 2 (rpm) | - | - |
PTO Speed 3 (rpm) | - | - |
Brake Type | Mechanical band | Differential contracting band |
Hydraulic System Type | Open center | Open center |