Comparing Allis Chalmers 5015 vs John Deere 1010C

This page provides a detailed comparison of the specifications for the Allis Chalmers 5015 and the John Deere 1010C. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

Allis Chalmers 5015
View tractor
John Deere 1010C
View tractor
Images No images available
Engine
Engine - Manufacturer Hinomoto (Toyosha) John Deere
Engine - Model CS-100 John Deere 1.9L 4-cyl gasoline | John Deere 2.4L 4-cyl diesel
Engine - Cooling Type Liquid-cooled Liquid-cooled
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type Diesel Gasoline | Diesel
Engine - Induction Type - -
Engine - Cylinders 3 4
Engine - Displacement (ci) 61.3 115.5 (gasoline) | 144.5 (diesel)
Engine - Bore (in) 2.874 3.50 (gasoline) | 3.625 (diesel)
Engine - Stroke (in) - -
Engine - Rated RPM 2500 2500
Engine - Power Output (hp) 18 40
Transmission
Transmission - Type Gear Manual
Transmission - Forward Gears 9 4
Transmission - Reverse Gears - -
Transmission - Total Gears - -
Dimensions
Length (in) 82.7 102.1
Width (in) 40.9 61.1
Height (in) 40.9 (hood), 46.9 (steering wheel) 70.9 (gasoline) | 74 (diesel)
Operating Weight (lb) 1278 (2WD Shipping), 1448 (4WD Shipping) 7,580
Miscellaneous
Chassis 4x2 2WD or 4x4 MFWD 4WD Crawler
Drive Type 2WD or 4WD 2WD
Steering Type - Multiple disc clutch and brake
Coolant Capacity (qts) 3.2 -
Front Tire Diameter (in) - -
Front Tire Width (in) - -
Rear Tire Diameter (in) 18 -
Rear Tire Width (in) 8 -
Front/Rear Rim Diameter (in) - -
Tire Type Ag, Lawn/turf -
Manufacture - End Year 1985 1964
Hitch Type - -
Hitch Category - -
Hitch Position - -
Hitch Capacity (lb) - -
Operator Station Type Open operator station with two-post ROPS Open operator station
Starter Type Electric Electric
PTO Type Rear: Continuous -
PTO Speed 1 (rpm) 540 -
PTO Speed 2 (rpm) - -
PTO Speed 3 (rpm) - -
Brake Type - Mechanical contracting band
Hydraulic System Type Open center -