Comparing Allis Chalmers 4W-305 vs Ford 820

This page provides a detailed comparison of the specifications for the Allis Chalmers 4W-305 and the Ford 820. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

Allis Chalmers 4W-305
View tractor
Ford 820
View tractor
Images
Engine
Engine - Manufacturer Allis Chalmers Ford
Engine - Model 6120T -
Engine - Cooling Type Liquid-cooled -
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type Diesel Gasoline, LP Gas
Engine - Induction Type - -
Engine - Cylinders 6 4
Engine - Displacement (ci) 731 172
Engine - Bore (in) 5.25 3.9
Engine - Stroke (in) - -
Engine - Rated RPM 2300 2200
Engine - Power Output (hp) 305 44
Transmission
Transmission - Type Two-speed power shift Unsynchronized Gear
Transmission - Forward Gears 20 5
Transmission - Reverse Gears - -
Transmission - Total Gears - -
Dimensions
Length (in) 285 113.6
Width (in) - 64.75
Height (in) 139 (height with cab) 55.5
Operating Weight (lb) 27100 3400
Miscellaneous
Chassis 4x4 articulated 4WD -
Drive Type 4WD -
Steering Type Hydraulic power Manual
Coolant Capacity (qts) 72 15
Front Tire Diameter (in) - -
Front Tire Width (in) - -
Rear Tire Diameter (in) 38 -
Rear Tire Width (in) - -
Front/Rear Rim Diameter (in) - -
Tire Type Ag Ag Front: 6.00-16, Ag Rear: Unknown
Manufacture - End Year 1985 1957
Hitch Type Rear Type: III/IV* (potentially Three-Point Hitch as common in tractors, but this is not confirmed) -
Hitch Category - -
Hitch Position Rear -
Hitch Capacity (lb) - -
Operator Station Type Cab (standard) -
Starter Type Electric -
PTO Type Independent -
PTO Speed 1 (rpm) 1000 -
PTO Speed 2 (rpm) - -
PTO Speed 3 (rpm) - -
Brake Type - -
Hydraulic System Type Closed center load-sensing -