This page provides a detailed comparison of the specifications for the Allis Chalmers 200 and the Deutz-Allis 8030. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
Allis Chalmers 200
View tractor |
Deutz-Allis 8030
View tractor |
|
---|---|---|
Images | No images available | |
Engine | ||
Engine - Manufacturer | Allis Chalmers | Allis Chalmers |
Engine - Model | Allis Chalmers | 670T |
Engine - Cooling Type | Liquid-cooled | Liquid-cooled |
Engine - Cylinder Orientation | - | - |
Engine - Valve Configuration | - | - |
Engine - Fuel Type | Diesel | Diesel (Turbocharged) |
Engine - Induction Type | - | - |
Engine - Cylinders | 6 | 6 |
Engine - Displacement (ci) | 301 | 426 |
Engine - Bore (in) | 3.875 | 4.25 |
Engine - Stroke (in) | - | - |
Engine - Rated RPM | 2200 | 2300 |
Engine - Power Output (hp) | - | - |
Transmission | ||
Transmission - Type | Constant mesh-helical gears | Partial power shift |
Transmission - Forward Gears | 8 | 16 (in one version), 20 (in another version), 12 (in yet another version) |
Transmission - Reverse Gears | - | - |
Transmission - Total Gears | - | - |
Dimensions | ||
Length (in) | 175.5 | 187 |
Width (in) | 87.625 | 93.4 |
Height (in) | 117.5 | - |
Operating Weight (lb) | 7,324 | Ranges from 14,200 to 17,100 depending on setup |
Miscellaneous | ||
Chassis | 4x2 2WD | 4x2 (2WD) |
Drive Type | 2WD | Two-Wheel Drive (2WD) |
Steering Type | Hydraulic power | Hydrostatic power |
Coolant Capacity (qts) | 18 | 31 |
Front Tire Diameter (in) | - | - |
Front Tire Width (in) | - | - |
Rear Tire Diameter (in) | - | - |
Rear Tire Width (in) | - | - |
Front/Rear Rim Diameter (in) | - | - |
Tire Type | Ag | - |
Manufacture - End Year | 1975 | - |
Hitch Type | Three-Point Hitch | - |
Hitch Category | - | - |
Hitch Position | Rear | - |
Hitch Capacity (lb) | 4,608 | - |
Operator Station Type | Open operator station | - |
Starter Type | Electric | Electric (12 Volts) |
PTO Type | Rear PTO | - |
PTO Speed 1 (rpm) | 540 | - |
PTO Speed 2 (rpm) | 1000 | - |
PTO Speed 3 (rpm) | - | - |
Brake Type | Ball actuated disc | - |
Hydraulic System Type | Open center | Closed-Center Load-Sensitive |