Allis Chalmers All-Crop

Last Updated: July 2024

Overview

The Allis Chalmers All-Crop tractor, manufactured in Milwaukee, Wisconsin, was equipped with a 4-cylinder Continental 284 gasoline engine with a displacement of 283.7 cubic inches, a bore of 4.25 inches, and a stroke of 5 inches. It had a rated RPM of 1200 and featured a Zenith carburetor, ElocmClnn magneto, centrifugal governor, and Donaldson & Trump air cleaner. The transmission was a non-synchronized gear type with 3 forward gears and 1 reverse gear, with advertised speeds ranging from 2 1/3 mph to 5 mph. The chassis had 4 wheels, with 2 drivers and an enclosed gear drive. The clutch was a Rockford Type Y plate operated by a foot pedal. The tractor had a 51-inch diameter drive wheel with a 2-inch face and a 42-inch drive wheel. It used gasoline fuel and had a coolant capacity of 20 quarts. The operating weight was 5955 pounds with the operator. Additional features included pressure-feed lubrication and extension rims with a 6-inch width.
Show more...

Key Specifications

Transmission: Non-synchronized gear

Operating Weight: 5955

Fuel Type: Gasoline

Technical Specifications

Engine

Manufacturer
Continental
Model
284 Continental
Cooling Type
Liquid-cooled
Cylinder Orientation
-
Valve Configuration
-
Fuel Type
Gasoline
Induction Type
-
Cylinders
4
Displacement (ci)
283.7
Bore (in)
4.25
Stroke (in)
5
Rated RPM
1200
Power Output (hp)
-

Transmission

Type
Non-synchronized gear
Forward Gears
3
Reverse Gears
1
Total Gears
-

Dimensions

Length (in)
-
Width (in)
-
Height (in)
-
Operating Weight (lb)
5955

Power Take-Off (PTO)

PTO Type
-
PTO Speed 1 (rpm)
-
PTO Speed 2 (rpm)
-
PTO Speed 3 (rpm)
-

Miscellaneous

Chassis
-
Drive Type
-
Steering Type
-
Coolant Capacity (qts)
20
Front Tire Diameter (in)
-
Front Tire Width (in)
-
Rear Tire Diameter (in)
-
Rear Tire Width (in)
-
Front/Rear Rim Diameter (in)
-
Tire Type
-
Manufacture - End Year
-
Hitch Type
-
Hitch Category
-
Hitch Position
-
Hitch Capacity (lb)
-
Operator Station Type
-
Starter Type
-
Brake Type
-
Hydraulic System Type
-

Test Results

Nebraska Tractor Test Laboratory - Test Date: April 17 to May 13, 1931

Maximum Power and Fuel Consumption

  • Maximum Power: 36.09 HP at 1198 rpm
  • Fuel Consumption at Maximum Power: 4.093 Gal/hr with a fuel efficiency of 0.685 lb/hp.hr
  • Operating Temperature: 185°F coolant out, 51°F air temperature

Drawbar Performance

  • Rated Load (Intermediate Gear) for 10 hours: 17.77 HP with a drawbar pull of 1193 lbs at 4.83 mph
  • Fuel Consumption at Rated Load: 3.334 Gal/hr with a fuel efficiency of 1.133 lb/hp.hr

Varying Load Performance

  • Varying Load for 2 hours: 31.18 HP at 1199 rpm with fuel consumption of 3.214 Gal/hr and an efficiency of 0.623 lb/hp.hr
  • Average Load: 20 min runs with different loads, average for 2 hours

Torque and Engine Performance

  • Carburetor Used: Zenith
  • Engine Rated RPM: 1200 rpm
  • Governor Type: Centrifugal

Specifications and General Information

  • Motor Make: Continental, 4 Cylinder Vertical
  • Drive: 4 wheels, 2 drivers, enclosed gear
  • Clutch Type: Rockford, operated by foot pedal
  • Total Weight as Tested (with operator): 5850 lbs



Nebraska Tractor Test Lab. (1931). Test 189: Allis-Chalmers "All Crop". Lincoln, NE: University of Nebraska-Lincoln. Retrieved from https://digitalcommons.unl.edu/tractormuseumlit/830

Compare with Similar Tractors

Compare with random tractors from our database